ATTMachine 1.5 Inch J Hook is a 38mm cargo tie-down hook designed for compatible ratchet straps, tie-down straps and load-securing assemblies. It provides a practical connection between 38mm webbing and compatible anchor points on trailers, trucks, vehicles and equipment.
ATTMachine supplies 1.5 inch / 38mm J Hooks for OEM production, wholesale and bulk cargo-control hardware requirements.
1.5 Inch J Hook Specifications
| Specification | Details |
|---|---|
| Product | 1.5 Inch J Hook |
| Size | 1.5 inch / 38mm |
| Webbing Compatibility | 38mm / 1.5-inch webbing |
| Hook Type | J Hook / Single J Hook |
| Product Category | Cargo Tie-Down Hardware |
| Compatible Straps | Ratchet straps, tie-down straps |
| Applications | Cargo securing and load securing |
| Manufacturer | ATTMachine Mechanical Co., Ltd. |
| Supply | OEM, wholesale and bulk |
Load rating: Breaking Strength (BS) and Working Load Limit (WLL) should be confirmed for the specific ATTMachine hook configuration, material, manufacturing specification and testing condition. Do not apply a load rating from another J Hook model or supplier to this product.
1.5-Inch J-Hook OEM Dimensions - ATTMachine wholesale
38mm J Hook for Ratchet & Tie-Down Straps
The 1.5 inch J Hook is designed around 38mm webbing systems commonly used for ratchet straps and cargo tie-down assemblies.
The hook can be integrated into a strap assembly where the J-shaped end fitting connects the webbing system to a compatible trailer, truck, vehicle or equipment anchor point.
For OEM applications, the hook configuration should be matched with:
-
38mm webbing width
-
Ratchet buckle specification
-
Stitching configuration
-
Anchor-point dimensions
-
Required hook opening and geometry
-
Required component strength
This helps ensure compatibility between the individual hardware components and the complete tie-down assembly.
Key Product Features
1.5 Inch / 38mm Compatibility
Designed for 1.5-inch (38mm) webbing, making it suitable for compatible 38mm ratchet and tie-down strap assemblies.
J-Shaped End Fitting
The curved J-hook profile allows the end fitting to engage compatible rings, rails, frames or other designated anchor points.
Cargo-Control Application
Suitable for cargo-control and load-securing products where a 38mm strap requires a compatible metal end fitting.
OEM & Bulk Supply
ATTMachine supports OEM, wholesale and bulk requirements for cargo tie-down hardware and related metal components.
Typical Applications
1.5 Inch J Hooks can be used as end fittings in compatible 38mm tie-down systems for:
-
Cargo tie-down
-
Ratchet strap assemblies
-
Trailer cargo securing
-
Truck cargo securing
-
Vehicle transport
-
Equipment transport
-
Industrial load securing
-
Cargo-control hardware
-
OEM ratchet strap production
The final application should always be evaluated against the actual hook specification, complete strap assembly rating and anchor-point capacity.
1.5 Inch J Hook for OEM Ratchet Strap Production
For manufacturers of ratchet straps and cargo-control products, the J Hook is one component of the complete strap assembly.
A typical assembly may include:
38mm Webbing → Ratchet Buckle → J Hook → Stitching → Anchor Point
ATTMachine can supply the metal hook as a component for OEM and bulk manufacturing programs.
For customized requirements, buyers can provide the required:
-
Webbing width
-
Hook type
-
Hook dimensions
-
Material requirement
-
Surface finish
-
Quantity
-
Packaging requirement
-
Drawing or sample
Practical applications of 1.5-inch J-hooks in the transportation industry - ATTMachine
J Hook Strength & Complete Assembly Rating
A J Hook's Breaking Strength does not automatically represent the capacity of the complete tie-down system.
The working capacity of a finished ratchet strap assembly can be affected by the:
-
J Hook
-
Webbing
-
Ratchet buckle
-
Stitching
-
Connection points
-
Anchor point
-
Manufacturing configuration
Therefore, BS/WLL should be specified and verified for the exact component or complete assembly being supplied.
This distinction is important for B2B buyers sourcing cargo-control hardware internationally.
How to Choose a 1.5 Inch J Hook
Before ordering, confirm these five points:
1. Webbing width: Confirm that the hook is designed for 38mm / 1.5-inch webbing.
2. Hook configuration: Check the hook opening, geometry and connection method against the intended anchor point.
3. Required strength: Specify the required BS/WLL based on the complete application rather than assuming a generic 1.5-inch rating.
4. Material and finish: Confirm the required material and surface treatment for the intended environment.
5. OEM requirements: For production orders, provide drawings, samples or technical specifications when dimensional customization is required.
1.5 Inch J Hook Manufacturer & Supplier
ATTMachine Mechanical Co., Ltd. supplies metal hardware for cargo tie-down, ratchet strap and load-securing applications.
Our product range includes J Hooks and other cargo-control components for manufacturers, distributors and B2B buyers.
For 1.5 Inch J Hook sourcing, ATTMachine supports:
-
Manufacturer-direct supply
-
OEM orders
-
Wholesale purchasing
-
Bulk quantities
-
Custom specifications
-
Cargo-control hardware sourcing
-
Related metal components
For technical or OEM requirements, buyers can send the required dimensions, drawing, sample or target specification for evaluation.
OEM & Bulk 1.5 Inch J Hook Supply
Looking for a 1.5 Inch J Hook manufacturer or 38mm J Hook supplier?
ATTMachine can discuss OEM and bulk requirements based on your application and technical specification.
For quotation, provide:
- Product: 1.5 Inch J Hook
- Size: 38mm
- Quantity: Required order quantity
- Application: Ratchet strap / tie-down / cargo control
- Specification: Drawing, sample or required dimensions if available
Request a Quote
ATTMachine Mechanical Co., Ltd.
Phone / Zalo: +84 942 127 028
Email: cokhi.anthanhtech@gmail.com
OEM, wholesale and bulk inquiries are welcome.
FAQ - 1.5 Inch J Hook
What is a 1.5 Inch J Hook?
A 1.5 Inch J Hook is a cargo tie-down end fitting designed for compatible 1.5-inch / 38mm webbing systems, including ratchet straps and tie-down straps.
What size webbing does a 1.5 Inch J Hook fit?
The product is intended for 38mm / 1.5-inch webbing. Buyers should confirm the exact hook and webbing configuration before production or assembly.
Can a 1.5 Inch J Hook be used with ratchet straps?
Yes. A 1.5 Inch J Hook can be used as an end fitting for compatible 38mm ratchet strap assemblies, provided the hook geometry and strength meet the requirements of the complete system.
What is the Breaking Strength of this J Hook?
Breaking Strength depends on the exact hook configuration, material, manufacturing specification and testing. ATTMachine should confirm the applicable BS/WLL for the specific model before a load-rated application.
Is every 1.5 Inch J Hook rated the same?
No. Market specifications vary significantly between J Hook designs and manufacturers. The 1.5-inch size identifies the intended webbing width; it does not by itself establish a universal BS or WLL.
Can ATTMachine supply 1.5 Inch J Hooks in bulk?
Yes. ATTMachine supplies cargo-control hardware for OEM, wholesale and bulk purchasing. Quantity and technical requirements can be discussed according to the project.
Can ATTMachine provide OEM J Hooks?
Yes. OEM requirements can be evaluated based on drawings, samples, dimensions, material, finish, packaging and required quantity.
What information should I provide for a quotation?
Provide the required quantity, 38mm webbing specification, hook dimensions or sample, material/finish requirements and intended application. This allows ATTMachine to evaluate the appropriate configuration.
Xem thêm