2 Inch Ratchet Straps (3 Ton Capacity)


Complete 2025 guide to 2 inch ratchet straps with 3 ton capacity: sizes, safety, WLL, and heavy duty applications. Premium ratchet tie down straps manufactured by An Thanh Technology Co., Ltd. in Vietnam.


Còn hàng


Introduction & Definition

What are 2 Inch Ratchet Straps? 2 inch ratchet straps (also known as ratchet tie down straps, ratchet strap, cargo straps, heavy duty straps, ratchets and straps, or cargo strap) are the industry-standard professional tie-down systems. Featuring 50mm polyester webbing and a forged steel ratchet buckle, they deliver exceptional tension and reliability. Our premium models offer a 3 ton capacity (breaking strength ~6600 lbs / 3000 kg), making them ideal for demanding heavy-duty applications in trucking, construction, and logistics.

Core Components:

  • Polyester Webbing — High-tensile, UV-resistant, low-stretch for superior durability.
  • Mechanical Ratchet Buckle — Heavy-duty forged steel with extended handle for powerful tightening.

The Advantage: With 3 ton capacity, these 2 inch ratchet straps provide greater strength than standard models while remaining easy to handle—perfect for securing vehicles, machinery, pallets, and lumber without slippage or loosening during transport.

Attmachine.com: 2 inch ratchet tie down straps securing industrial equipment.

2 Inch Ratchet Strap with Double J-Hooks

Technical Size Comparison Table

Quick comparison of ratchet strap sizes with load capacities:

Strap Width Typical Breaking Strength Working Load Limit (WLL) Best Applications
1 Inch 1,500–3,000 lbs 500–1,000 lbs Light-duty: Motorcycles, small cargo
1.5 Inch 3,000–6,000 lbs 1,000–2,000 lbs Medium-duty: ATVs, furniture
2 Inch 3 Ton (6600 lbs) ~2200 lbs Heavy-duty: Vehicles, pallets, machinery
3 Inch 7–10 Tons 5,000–6,667 lbs Professional heavy machinery
4 Inch 10+ Tons 6,667+ lbs Extreme industrial loads

The 2 inch ratchet strap with 3 ton capacity is the preferred choice for most commercial heavy-duty hauling.

Attmachine.com: 2 inch ratchet tie down straps with 3 ton capacity in action.

Ratchet Strap Sizes Comparison

Expert Selection Guide: The 1/3 Rule

WLL vs. Breaking Strength Breaking strength (~3 ton / 6600 lbs) is the maximum failure point; WLL (~2200 lbs) is the safe continuous load—typically 1/3 of breaking strength for safety margin.

The 1/3 Rule Divide total cargo weight by WLL per strap to calculate minimum quantity. Example: 10,000 lb load requires at least 5 2 inch ratchet straps (add extras for stability and regulatory compliance).

End Hardware Options

  • J-Hooks: Enclosed grip for frames/axles.
  • Flat Hooks: Wide surface for E-track/rails.
  • Wire Hooks: Versatile for chains.

attmachine.com: 2 inch ratchet tie down straps with 3 ton capacity securing cargo globally.

Various Hooks for 2 Inch Ratchet Straps

Step-by-Step Safety & Operational Guide

  1. Inspection — Check webbing for cuts/frays and hardware for rust.
  2. Threading — Open ratchet fully; feed webbing through mandrel.
  3. Tensioning — Pump handle steadily until firm.
  4. Locking — Close handle; perform tug test.
  5. Releasing — Press lever, open flat, pull slowly.

 

 

Industrial & Commercial Applications

  • Trucking/Logistics — Pallets and containers on flatbeds.
  • Construction — Lumber, steel, heavy equipment.
  • Automotive — Vehicle transport and recovery.
  • General Hauling — Boats, machinery.

Attmachinecom: Top 5 ratchet buckle manufacturer in Vietnam

2 Inch Ratchet Straps Securing Load on Flatbed

Attmachine.com: 2 inch ratchet buckle 6,613 lbs securing cargo worldwide.

Heavy Equipment Secured with 2 Inch Straps

An Thanh Technology Co., Ltd. – Your Trusted Manufacturer

An Thanh Technology Co., Ltd. is a leading manufacturer of 2 inch ratchet straps with 3 ton capacity and full cargo securing range in Asia.

  • Compliance — Meets EN 12195-2 for proven safety and reliability.
  • B2B Benefits — OEM/ODM customization, factory-direct pricing, fast global shipping (3–7 days).
  • Location — 32-34 D. Cong Khi Street, Hamlet 1, Hoc Mon District, Ho Chi Minh City, Vietnam.

Frequently Asked Questions (FAQ)

When should I replace 2 inch ratchet straps? Replace immediately for cuts, frays, UV damage, or rust—typically every 2–4 years with heavy use.

Suitable for extreme weather? Yes—polyester webbing resists moisture, heat, and UV degradation.

J-hook vs. Flat hook? J-hook for enclosed secure grip; flat hook for wide, stable rail contact.

Contact Information & Call to Action

Contact us today for bulk quotes on 2 inch ratchet straps with 3 ton capacity!

Sản phẩm liên quan

Đã thêm vào giỏ hàng